Specifications include, but are not limited to: General It is the purpose of this specification to remove and replace the existing driveway, curb, and cracked section of one of the bays. All material and work shall meet current TDOT specifications. Concrete Removal This work consists of removal and disposal of all concrete and concrete curbs shown in the plans. All work shall meet TDOT Specification 202.03. Mineral Aggregate Base This work consists of furnishing and placing one or more courses of aggregates, and additives if required, on a prepared subgrade. Mineral aggregates base shall be Type A. Load Transfer Dowels This work consists of furnishing and installing load transfer dowels. These dowels shall be at a spacing of no more than 3’ as shown on the plans and shall follow TDOT Specifications 502-04.02 Concrete Curb This work consists of constructing Curb, Gutter, or Combined Curb and Gutter of Portland cement concrete and shall follow TDOT Specifications 702.
