Specifications include, but are not limited to: DESCRIPTION BLANKET/JACKET LINING FABRIC FIBER CONTENT 100% POLYESTER (TOLERANCE +/- 3% TEST METHOD AATCC20A) COLOR SOLID GRAY (MATCH CURRENT SWATCH) CONSTRUCTION FELTED WEIGHT 7.2 OUNCES / SQUARE YARD (TOLERANCE: +/- 5% TEST METHOD ASTM D3776/D3776M) WIDTH 60” MINIMUM CUTTABLE ROLL SIZE 100-150 YARDS PER ROLL SHRINKAGE NOT TO EXCEED 5% SHRINKAGE BASED ON THREE WASH/DRY LAUNDRY CYCLES IN AN INSTITUTIONAL LAUNDRY (TEST METHOD AATCC 135) FIRE RETARDANT MATERIAL MUST PASS ALL FLAMMABILITY TESTS REQUIRED FOR USE IN THE MANUFACTURING OF BEDDING AND CLOTHING AS SET FORTH IN THE FLAMMABILITY FABRICS ACT REGULATION (TEST METHOD ASTM D 4151-18) PACKAGING PACKAGING SHALL BE OF INDUSTRY STANDARD. EACH PACKAGE SHALL BE UNIFORM IN SIZE, AND WEIGHT AND SHALL BE CLEARLY LABELED AS TO CONTENTS. EACH PACKAGE SHALL BE WRAPPED WITH PROTECTIVE MATERIAL THAT WILL PROTECT THE PRODUCT FROM DIRT, DUST, MOISTURE AND HANDLING DAMAGE AS IS COMMONLY EXPERIENCED IN THE TRANSPORTATION, HANDLING AND STORAGE OF THIS TYPE OF PRODUCT QUALITY SHALL ONLY BE GRADE (A) OF THE FIRST QUALITY OF MANUFACTURING FOR THIS MATERIAL. SECONDS OR ANY OTHER THAN THE VERY BEST QUALITY SHALL NOT BE ACCEPTED. GRADING SHOULD FOLLOW ASTM D5430-13 NOTE: GRADE (A) MATERIAL THAT CONTAINS THE FOLLOWING: SLUGS, THIN PLACES, HOLES ON THE SELVAGE EDGE, DIRT SPOTS, HOLES, SPLICES, OTHER TYPES OF THREAD CONSTRUCTED INTO THE MATERIAL, AND ½” OR MORE CUTS IN FABRIC WILL NOT BE ACCEPTED AND WILL BE RETURNED. SELVAGE EDGE MUST BE SMOOTH, NOT RAVELED ACCEPTANCE RECEIPT OF GOODS AT OUR FACILITY DOES NOT CONSTITUTE ACCEPTANCE. ALL GOODS ARE SUBJECT TO TESTING AND EVALUATION AFTER RECEIPT. GOODS NOT TO SPECIFICATION WILL BE REJECTED AND RETURNED TO THE VENDOR WITH ALL ASSOCIATED COSTS AT THE VENDOR’S EXPENSE.
