Specifications include, but are not limited to: The Contractor must provide all labor, installation, tools, equipment, materials, transportation, supplies, and disposal of materials and incidentals necessary to perform repair-by-replacement services of existing temperature controls and sensors with new BACnet MS/TP controllers and programmable thermostats for the Minnesota Department of Military Affairs (MDMA), for buildings located at the Camp Ripley Training Center, 15000 HWY 115, Little Falls, MN 56345: Building 11-169. N2 Upgrade and RM-T Sensors - material and labor to replace 56 existing room temperature sensors with new technology BACnet MS/TP Net stats. This includes the material and labor to disconnect and demo the existing room temp sensors, install and reconnect the new room temp sensors, cable terminations, and commissioning to verify proper operation. Existing cabling to the room temperature sensor can be reused. This work must include labor to coordinate upgrade schedules and switch covers with occupants as the building will remain occupied during the course of work. Building 10-71. Direct Digital Controls (DDC) – material and labor to provide a complete temperature control system and extension of the existing web-based facility management system. This includes material, installation labor, and programming labor to provide new DDC controls for two (2) existing furnaces with two (2) stages of gas heat and two (2) stages of DX cooling per building. This work shall include furnishing and installing two (2) zone temperature sensors per building
