Specifications include, but are not limited to: 1) Windows- Division 7 A. Remove and replace existing double hung windows located at “A-D” façades with New Construction Windows. a) A façade- 8 DH windows b) B façade- 5 DH window, c) C façade- 9 DH windows, 1 casement d) D façade- 4 DH windows (2 tempered), 3 basement e) Verify size f) Install interior extension trim/extensions as need to complete interior finish, paint stain as needed. g) Install New exterior trim replacing existing. h) Ensure proper vapor berries and insulation at cavities. i) Install all framing to properly set and secure new window j) Paint or stain new or disturbed work k) All windows to be manufactured by Mercury Excelum or Harvey (with energy star glazing package) or an approved equal. l) All units to be white m) All operable units to include full standard fiberglass mesh screens n) Refer to specifications for additional information o) All work to be performed to code requirements 2) Smoke and Carbon Monoxide Detectors – Division 21 A. Provide and install smoke detectors, one in each bedroom (3) a) All detectors to be interconnected battery operated b) All work to be performed per building code requirements c) Refer to specifications for all work B. Provide and install combination smoke/CO detectors, one at each level (3) a) All detectors to be interconnected battery operated b) All work to be performed per building code requirements c) Refer to specifications for all work 3) Overhead Doors (Division 8) A. Install (2) new garage door a) Remove existing overhead door and associated hardware including tracks b) Remove degraded steel plate and install new header as needed, rap with aluminum coil stock c) Provide and install new Clopay Overhead Door (verify dimensions) i) 3 layer construction white garage door, 18.4 R-Value ii) Raised panel, windows on 3rd row up iii) Door installation to include new tracks, springs and mounting hardware d) Replace jambs and trim with composite jambs and trim e) Install head flashing f) Install continuous weather-stripping at perimeter of door g) Provide continuous caulk at all edges. h) Provide and install new Lift Master Motor Operators i) Premium series Model 3265 ii) ½ hp chain drive i) Refer to specifications for all work j) All work to be performed to code requirements
