Specifications include, but are not limited to: Equipment Current year model 20,000 Lb. payload capacity equipment trailer. Describe: Make_____________________________________ Model_____________________________________ __________________________________________ Capacity 20,000 Lb. payload. 26,000 Gross Vehicle Weight Rating approx. Describe: __________________________________________ __________________________________________ Platform 1. Platform deck to be 30-feet overall length and have a 5-foot dovetail. (For a total of 35-feet) 2. Width of 8-feet and 6-inches (102-inches) 3. Deck height of approximately 35-inches. 4. Structural components of 100,000 PSI tensile strength, with cross members on 16-inch centers. 5. Two (2) inch Oak deck. 6. Six (6) D-ring tie downs. Two (2) to be mounted 24-inches from the front of the deck, two (2) to be mounted 24-inches from the rear of the deck, and two (2) pair to be mounted evenly centered between the front and rear D rings on each side. 7. Side steps, two (2) located forward of the front axle, extending 7-inches below the frame on each side. Describe: 1_________________________________________ __________________________________________ 2_________________________________________ 3_________________________________________ 4_________________________________________ __________________________________________ 5_________________________________________ 6_________________________________________ __________________________________________ __________________________________________ __________________________________________ __________________________________________ 7_________________________________________ __________________________________________ __________________________________________ Ramps 1. Two (2) ramps with a length of at least 58-inches each. 2. Width of each ramp to be 21 ½-inches minimum. 3. Fold-over type, hinge pinned, spring assisted, cleated, self-supporting, self-cleaning, adjustable type ramps. 4. License plate bracket to be mounted on the street side ramp so it faces the rear when the ramp is in the raised position.
