Specifications include, but are not limited to: Orange T-Shirt Material ORANGE JERSEY MATERIAL FOR THE PRODUCTION OF T-SHIRTS Pantone Color No. 40128PC-2 Width: 20 Inches First quality goods only, no cut pieces. Roll to be one continuous piece. Jersey knitting machines to finish at 38 to 43 C.P.I. and 30 to 36 W.P.I. for main body and sleeve fabric. Jersey is to be 50% polyester fabric and 50% cotton fiber blending (yarn +/- 5%). Weight: 4.3 to 4.5 oz. per yard Fabric must be within 1/2" (+/-) tolerance of fabric width ordered. *** NOTE: Material is to be put on rolls with the "wrong" side of the fabric facing out. *** All material to be shrink-wrapped, labeled, and palletized. When palletized, all labels on rolls of fabric should be facing outward, with visible to read, size, weight, etc. Rolls are to be wrapped in heavy-duty plastic sheeting and packaged securely to prevent soiling and damage during shipment. Fabric is to be finished on rolls that weigh approximately 40 lbs. each. Finish: The fabric is to be calendared and heat set for maximum dimensional stability. Starch and protein content shall not exceed three percent (3%). A shrinkage control treatment or process shall have been used in finishing the fabric to control garment shrinkage. Shrinkage not to exceed five percent (5%) in length and width under the following conditions in institutional laundry: * Average Water Temperature: 120 – 160 degrees Fahrenheit * Average Dryer Temperature: Not to exceed 200 degrees Fahrenheit Color Fastness: To lights (Carbon - ABC Type – Padometer). Twenty (20) hours – No appreciable change in color. ; Orange T-Shirt Material *Same specifications as Line 1 except for Width Width: 22 Inches; Orange T-Shirt Material *Same specifications as Line 1 except for Width Width: 24 Inches; Orange T-Shirt Material *Same specifications as Line 1 except for Width Width: 26 Inches
