Specifications include, but are not limited to: 4.1 Truck Chassis a. 2024 model year FTR 170 Wheelbase body length 18ft payload max16186lbs and curb weight 10.321. b. Cab-over design with tilt cab c. Class 6 chassis (26,000 lb. GVWR, non-CDL). d. Minimum 10,000 lb. payload capacity (excluding liftgate). e. Dual rear wheels. f. 14-PR 11R22.5” Tires (premium highway tread). g. Cummins: B6.7L Diesel 260 HP @ 2400 RPM 660 LB-FT@1600RPM incorporation a DPF exhaust and a SCR h. 6 Speed Allison 2500 RDS Automatic transmission including Park PAWL i. Full Air dual circuit with ABS and S-CAM drum brakes. Front 16.5 inch and rear 16.5 inch. j. Air ride rear suspension 17-CFM k. Telescopic steering wheel. l. Power assisted steering. m. Cruise control. n. Power windows and locks. o. Magnetic Suspension driver seat. p. Cloth driver and passenger seats. q. Heated/ power exterior mirrors. r. 8” spot mirrors. s. Cab air conditioning. t. AM/FM radio with Bluetooth capability. u. Two (2) 12 Volt charging options minimum. v. Fuel capacity: 50 gallons min. w. Back up alarm. x. Back up camera. y. Power door locks. z. Exterior color: white. aa. 36-month warranty on engine and power train. bb. LED headlamps and daytime running lights. 4.2 Cargo Box a. 18’ dry box. Overall width: 96”, inside height: 96”, door opening entry height clearance: 89”. b. Fully insulated with 1” block foam or equivalent (excluding roof panel). c. Fully lined, 3/8” plywood sides and front wall. d. Laminated hardwood floor. e. Recessed logistics E-track system, two rows (front and sides). The E-track system shall be installed at a height of 31” and 52” respectively. f. Translucent fiberglass roof. g. 3/4” roll-up rear door (door opening entry height clearance: 89”). h. Aerodynamically designed fiberglass front header. i. Heavy duty rear corner posts capable of supporting a 1655 lb. rail type liftgate. j. Two (2) recessed interior dome lights with switch one (1) in the cab and one (1) in the box. k. Department of Transportation approved lighting including two (2) directional indicator lamps at mid box. l. The minimum laden bed height shall be 48”. The truck, with box and lift-gate installed, shall be capable of loading and unloading from a standard height dock. m. The rear frame shall be a minimum 11 gauge 304 stainless steel or equivalent with corner gussets and built in rain gutters. n. 36 month warranty which shall include leakage. 4.3 Cable Axle Length The cab axle length shall be determined by each manufacturer and shall be noted in each Bid response. In determining the correct cab axle length, each manufacturer shall consider the required box length and payload capacity. The cab axle length shall be configured in such a manner that the GVW for each axle shall not exceed the manufacturer’s specifications.
