Specifications include, but are not limited to: • Fabricate and install 3 Modular Offices • 1 office @ 12’ X 13’6 with--1@10’ X 10’ office Connected (Future use offices) Overall length 23’ 6. This office will be connected to an existing wall on one side. • 1 @ 12’ X 19’ with--1@12’ X 10’ Office connected. (Carpenter Shop Offices) Total length 31’- 0” • 1 @ 12’ X 20’ with--1@12’X10’ office connected. (Plumber Offices) Total length 30’-0” • Include Structural Stamped Drawings. • Includes complete installation. • Walls to be White FRP covered Gypsum Board on both sides. Walls to be 10‘-2” High overall. • All materials to be supplied in the package, including Class A Suspension system acoustical ceiling, USG Radar #2310, 2 X 4 lay in tiles, Kraft faced Fiberglass R-19 ceiling insulation. • Doors to be 3’ x 7’0” X 1-3/4” 20 GA. • Door Frames to be 16GA. • Supply all necessary door hardware. • Each door includes a sweep, threshold, satin chrome lever set and weather-stripping. • All lever sets shall be the FSIC Core type. • Each Office shall have prewired switches, plugs, included Per attached drawing, lighting as to meet local and state code requirements with 110-volt 2x4 lay-in LED light fixtures, installation included. • Each Office shall have boxes for Telephone/Data ports per attached drawings. • Quote to include Shipping. • Final Electrical tie-in to main electrical box to be done by County of Sacramento. All other electrical needs to be done by contractor.