Specifications include, but are not limited to: Remove existing gutter and door awning. Post may be 3” square tubing, post to center on 8’2” centers #10 post, fasten to concrete. Roof and soffit sheet must be 3’ x 6’; brown to match existing building. Framing inside of awning can be steel or wood. Be sure to specify in the bid. For steel – must be supported with 3” angle iron; 2” square tubing welded in place with C-purlin to support sheeting. Each end must also be covered with wood. 2x6 beams to support front main beam, 2x4 on truss, 1x4 for purlin; each end must be covered. The north wall is 10’ tall. Bottom end of awning must have an 8’ clearance. Approximate 2’ slope. Roof must be sealed to the north wall to stop any water. All 3” posts must be painted to match roof. Must have trim on corners and rate to match building.
