Specifications include, but are not limited to: Epoxy Prep Mechanically grind the substrate in order to apply epoxy primer floorguard hyper prime or GP 3504 Base-Coat Install Floorguard DT 454 100% High solids pigmented epoxy at approximately 16 mils in thickness. Flake Broadcast Full Flake Broadcast till absolute rejection Base-Coat Install Floorguard DT 454 100% High solids pigmented epoxy at approximately 16 mils in thickness National Polymers High Wear Urethane Install NPI 359 High Wear Urethane at 12 mils. Matte Finish with aluminum oxide Aluminum Oxide 40 Mesh Added slip resistant for extra protection from wear and tear Sand Between Coats Using an industrial floor buffer sand between coats to ensure all imperfections are removed to ensure a near to perfection topcoat can be applied using 8-grit screens Patching Concrete Patch all cracks, spalls, fill control joints with flexible polyuria and install rapid set concrete or portland cement as needed for larger cracks
