Specifications include, but are not limited to: This project is to update Thames Polymer Science Hall to the University's current access control system. Exterior Doors: To modify all existing exit device locks on all doors leading into the building from the exterior perimeter doors of Polymer Science Hall. To run required composite Cables (multi-conductor cable) from third floor communications to exterior doors from side door to parking lot, side door to porch, front door to atrium. Atrium door, access control reader to be wired to the Automatic Door Opener for ADA compliance. Interior Doors: To replace all existing electronic mortise locks on all office rooms, classrooms, data rooms (as determined by USM), mechanical rooms (as determined by USM), and storage rooms (as determined by USM). To modify all exit device locks by adding WiFi readers to those existing exit devices in the interior of the building.
