Specifications include, but are not limited to: Tear-off and replace existing roofing. Include ice & water installation, replacement of damaged underlayment, valley metal flashings, roof jacks, box vents, step flashings and any other accessories which may be required. Homeowner to select new shingle color from Timberline stock colors. Install new kick-out step flashings where appropriate. A. Include dumpsters and dispose of demo materials properly. Provide and install new TIMBERLINE GAF ARCHITECTURAL shingles. Meet all state and local installation Codes complete with proper ice and water shield. Provide and install no less than five (5) new box vents to exhaust the attic. Confirm if additional vents are required with the roof dimensions. B. Provide and install gutters and downspouts complete. WRAP the fascia boards with metal. Provide all materials and labor. C. INCLUDE 6 sheets of exterior roof sheathing (Roof Decking) to replace any damaged and to cover the demo and removed chimney. Provide the cost per sheet that include material and labor. Any unused sheathing from this (6) sheet allowance will be credited back out of the project total at the material and labor unit cost provided. D. Include costs to remove and “roof over” the chimney and chase. Include all new materials needed to re-vent the active exhaust lines from furnace, HRV and any other venting from items such as Gas Hot Water Heater that run through this existing chimney. Provide and install all new roof boots, piping, flashing and all related materials and equipment for this piping/exhaust as it penetrates the new roofed over area. The area of the removed chimney that is above the shingled roof will be completely roofed over. Contractor to provide and install all materials as required to repair the roofing, siding and costs related to completely abandoning the chimney above the roof line. The area of the chimney below the roof line will be repaired with sheathing, insulation and siding provided and installed by the contractor.
