Specifications include, but are not limited to: Hardware Information The vendor should include an itemized list of proposed hardware. The proposal should include four (4) body-worn cameras (including the proposed model name / model number) and any necessary supporting equipment (i.e. straps, clips, cables, adapters, etc.). This can be a proposed draft list with the understanding that the vendor can modify it later after further discussions with the Town if relevant. The vendor should include how the camera is attached to the body. We specifically do not want magnets that attach to the officer’s shirt as that is very uncomfortable to have a magnet on the skin in the summer. We are looking for a body cam harness/body mount solution. Attached are recommended technical specifications provided to us by the State of Connecticut (see attached specifications on the last pages of this document). The vendor should review the attached specifications and speak to if their solution meets the State’s proposed recommendations or not