Specifications include, but are not limited to: Perform inspections and repair services to gymnasium equipment located at (17) school facilities. A. BASKETBALL BACKBOARDS (STATIONARY & SWING-UP) 1. Check all pipe or beam clamps securing unit to ceiling, tightening and realigning where loose. 2. Check all wall anchorage, stringers and pipe connections, tightening where loose. 3. Check all support members, suspension fittings, back braces, tie rods and turnbuckles, flat braces and clamps, as well as bracket-to-board connections. 4. Check all nuts, bolts and lag screws, tightening where loose and replacing where broken or missing. 5. Check, lubricate and adjust where necessary all knees elbows, pivots, guide rods and knuckles involved in the swing-up backboards. 6. Check for proper goal rim height and board plumb and adjust as needed. B. BACKBOARD WINCHES 1. Remove gear guard check gears for excessive wear. Lubricate all friction-producing parts. 2. Check wire cable for kinking, fraying and “life” as well as security of connections to winch drum and backboard. 3. Check all pulley ceiling connections and wall anchorage for security, tightening and adjusting where necessary. 4. Check all tension straps to ensure they have not been released or show signs of wear 5. Lubricate all sheaves, bearings and swivels of pulleys and realign where necessary. NOTE: Electric circuits and limit switches are not included in this work. A licensed electrician should be consulted to correct any problem of an electrical issue. Include price to provide this optional service in the proposal. C. FOLDING BLEACHERS 1. Check all nuts and bolts on frame and supporting members, tightening where loose and replacing where missing or broken. 2. Check all wall anchorage for loose or broken shields, lags or brackets, repairing or replacing as necessary. 3. Check all welded joints on supporting and bridging members. 4. Check all bolts, nuts and lag screws securing woodwork to supporting members and tighten as necessary. 5. Check all safety locking mechanisms for proper operation. 6. Check all wheels, rollers and casters for freedom of movement. 7. Check all seat, riser, floor and apron boards. Cleat all split or cracked boards that are otherwise sound. 8. Check all tier supports, adjusting for proper clearance when opening or closing. 9. Check all friction producing parts for wear, lubricate for proper operation and ease of movement.
