Specifications include, but are not limited to: Perform the following work on passenger cars: ARR 554: 1. Remove seats and tables for reinstallation after installing new carpet tile in seating areas. Care must be taken to prevent damage to seat frames, upholstery, tables and all interior fittings. Contractor will be responsible for the cost of replacing or repairing any damage to interior furniture, fittings and fixtures. 2. Demo existing broadloom carpet under seating areas per attachment 1. CAUTION: Care must be taken to prevent delaminating sheet metal facing from the existing subfloor during carpet demo. 3. Install ARRC provided modular carpet tile (Mohawk Braided Stream II or similar, 24” tiles) in seating areas per attachment 1. a. Carpet tile adhesive provided by contractor after submittal approval by ARRC. 4. Reinstall existing seats and tables into original location using existing fasteners. 5. Prime aisle walkway using contractor provided Schonox SHP and level to within 3/16” in 10’ or better using Schonox AST patching compound. 6. Install ARRC provided industrial rubber flooring (1 meter squares) Norament 926 Grano in aisle walkway and 5306 Camphor high-grip yellow on ramps per attachment 1. a. Flooring to be installed using ARRC provided Nora PU 310 2-part adhesive. 7. Install ARRC provided LLEPM aluminum glo-strip track per attachment 1. Track installation requires leaving a 1.25” gap in finish flooring for track to set into. Perform the following work on passenger cars: ARR 555, 556 &557: 1. Remove seats and tables for reinstallation after installing new broadloom carpet in seating areas. Care must be taken to prevent damage to seat frames, upholstery, tables and all interior fittings. Contractor will be responsible for the cost of replacing or repairing any damage to interior furniture, fittings and fixtures. 2. Demo existing broadloom carpet under seating areas per attachment 1. CAUTION: Care must be taken to prevent delaminating sheet metal facing from the existing subfloor during carpet demo. 3. Install ARRC provided broadloom carpet using ARRC provided adhesive in seating areas per attachment 1. a. Contractor is responsible for gathering broadloom carpet from the ARRC anchorage yard and slitting full width rolls to required size off-site for final installation. 4. Reinstall existing seats and tables into original location using existing fasteners. Perform the following work on passenger cars: ARR 651 &652: 1. Demo existing dome and main level aisle way broadloom carpet per attachment 1. Contractor will be responsible for the cost of replacing or repairing any damage to interior furniture, fittings and fixtures CAUTION: Care must be taken to prevent delaminating sheet metal facing from the existing subfloor during carpet demo. 2. Install ARRC provided broadloom carpet in seating areas per attachment 1. a. Contractor is responsible for gathering broadloom carpet from the ARRC anchorage yard and slitting full width rolls to required size off-site for final installation. 3. Existing Low Location Exit Path Marking glow strip and track to remain. Tuck tufts of new carpet under edges of LLEMP track to provide finished look.
