Specifications include, but are not limited to: Security contractors shall provide, install and program a completely functional and operational system as shown on drawings and specifications. 1.1.2 The security contractor shall provide a phased installation of the electronic security systems based on the owner’s schedule (see Project Phasing herein). 1.1.3 Security contractor shall provide and install all wiring, devices, connections, programming, and coordination required for a completely functional and operational system. The security contractor shall provide all custom back boxes and as required. 1.1.4 Include final connections, programming, training, and testing of the work to the head-end equipment per the owner’s security consultants’ and project design documents requirements. 1.1.5 Attendance at construction coordination meetings per the owner’s schedule and requirements. 1.1.6 Coordination of work with other design and installation trades. 1.1.7 Install end-of-line (EOL) resistors as required. EOL’s shall be installed at the individual points of protection not at the control panel, or at the reader and/or input modules if located remote from the panel.
