Specifications include, but are not limited to: BASE BID: MODEL 1. Straight truck provision 2. Left-hand steering 3. Set-back axle truck package ; GENERAL SERVICE 1. Front axle load: 16,000 pounds minimum 2. Rear axle load: 40,000 pounds minimum 3. GVW: 54,000 pounds 4. Front plow/end dump body 5. Dirt/sand/rock commodity 6. 100% on highway/city terrain 7. Rough, maintained, concrete/asphalt…road surface 8. Maximum 8% expected grade; TRUCK SERVICE 1. WHEELBASE: 175.0 inches minimum. 2. CAB TO AXLE LENGTH: 107.90 inches minimum; ENGINE 1. Diesel fuel must be WET SLEEVE in-line 6 Cummins engine with 300HP @800 lbs torque w/air intake heater minimum; ELECTRONIC ENGINE CONTROL 1. Accomplish minimum speed of 75 MPH (loaded); ENGINE EQUIPMENT 1. Air intake heater 2. Air cleaner: Two-stage with restriction gauge. 3. Alternator: 160 AMP. 4. Batteries: Two (2) – 12-volt maintenance free with 1,850 CCA. 5. Jumpstart provision. 6. Compressor: (Cummins) 18.7 CFM or equal. 7. Engine protection warning system. 8. Manual Fuel Priming Pump. 9. EXHAUST: Single RH horizontal muffler w/vertical exhaust, over the frame routing, cab mounted. 10. MUFFLER SHIELD: Stainless steel 11. FAN DRIVE: Horton drive master on/off or equal. 12. RADIATOR: Heavy duty increased capacity for stationary operation. Auto on/off engine fan. 1045 SQ IN aluminum. 13. COOLANT: Heavy duty, ethylene glycol precharged SCA to –30F 14. COOLANT HOSE: Standard hoses. 15. Air intake warmer. 16. Heater shut off valve
