Specifications include, but are not limited to: A. Coordinate plumbing equipment and materials installation with other building components. B. Verify all dimensions by field measurements. C. Arrange for chases, slots, and openings in other building components to allow for plumbing installations. D. Coordinate the installation of required supporting devices and sleeves to be set in poured in place concrete and other structural components, as they are constructed. E. Sequence, coordinate, and integrate installations of plumbing materials and equipment for efficient flow of the Work. Give particular attention to large equipment requiring positioning prior to closing-in the building. F. Coordinate the cutting and patching of building components to accommodate installation of plumbing equipment and materials. G. Where mounting heights are not detailed or dimensioned, install plumbing services and overhead equipment to provide the maximum headroom possible. H. Install plumbing equipment to facilitate maintenance and repair or replacement of equipment components. As much as practical, connect equipment for ease of disconnecting, with minimum of interference with other installations. I. Coordinate the installation of plumbing materials and equipment above ceilings with suspension system, ductwork, plumbing equipment, light fixtures, and other installations. J. Coordinate connection of plumbing systems with exterior underground and overhead utilities and services. Comply with requirements of governing regulations, franchised service companies, and controlling agencies. Provide required connection for each service. K. Where plumbing work penetrates other trade work such as gypsum board walls, etc., penetration shall be neatly cut and walls shall be filled and patched.
