Specifications include, but are not limited to: Contractor shall form and cast in place a 12 inch thick cap on top of the existing wall blocks. The concrete blocks are 2-ft wide. The top of the block salt containment is 4-ft above the pavement. All concrete shall be sealed with a salt protective sealant. Contractor shall install anchor bolts to secure the Car Port. Contractor shall install #4 rebar at 2 inches and 4 inches from the outside edges of the forms and set them in the midpoint of the concrete cap, 4 bars in total. Rebar shall be tied in place as to not move during placement of concrete. Contractor shall not set Car Port until 7-day cure or if the contractor chooses to place High Early concrete. Cool or cold weather curing may be applicable.