Specifications include, but are not limited to: A. Minimum interior height of 72 inches minimum length of 16 feet. B. Maximize interior floor space for storage of public safety bomb technician equipment while in transport to minimize potential for items to fall or move while vehicle is in transit. C. No wheel well housing hump in interior D. Six (6) interior shelves with lips, three (3) per side, 16 inches wide, 24 inches high minimum E. Power windows F. Mounted 12-volt, air conditioner/heater minimum 25000 BTU. G. Lighted bumper with recess for combination hitch H. Back up camera I. Work stations for remote robot operator to perform maneuvering mission as well as work station for XRay processing and diagnostics. J. Exterior white powder coat finish. K. Power locks/ locks on storage areas for security while personnel are away from vehicle on mission. L. Alarm system integrated with truck M. Four (4) white LED lights for interior, evenly spaced N. 12 LED lights, four (4) on each exterior side, 12 total (driver, passenger, rear), Brooking Industry ST6, with white bezel O. Spray liner for box interior P. Ramp options sufficient for a Bomb Robot (that weighs approximately 550 pounds) and is approximately 28” wide, which will include one (1) of the following choices: i. Power lift-gate ii. RollA-Ramp 36”, or other brand with equivalent features including Q. Generator (Honda Super Quiet or other brand with equivalent features), largest available to fit on slides and installed in one (1) of the available truck body compartments. Training on the trailer’s features and technologies must be included (outline training programs and materials available) R. Remove conduit/pip rack, if present. Leave access door for electrical cords. S. Awning for at least one (1) side of box truck
