Specifications include, but are not limited to: For designated sections of road within the project location, work will consist of coldplaning a butt joint 20 feet long tapering from 0” to 1” at each end of the street sections sweeping the road, placing a tack coat, shimming the road to re-establish a uniform cross slope, applying another tack coat and overlaying the entire road with one inch of asphalt. Driveway aprons will be trimmed prior to overlay to ensure a smooth transition from the new pavement to the existing. (2’ wide along the full width of driveway. 0”-1”) The intent of the contract is to re-establish a uniform cross slope, improve ride ability and reduce future maintenance. The Contractor will also place a 2-foot gravel shoulder to back up the new pavement edge. This gravel will be flush to the final overlay.
