Specifications include, but are not limited to: Size: 2”x 4” parking passes to be fabricated from Flexon Compucal TM-200-W VOID MT/C-352, Adhesive: V156, Liner: Spec. 50k-8 with 1 mil clear Mylar Lamination. Passes will be produced for installation on the exterior glass (windshield) of vehicles and MUST VOID when removed after initial application. They must have perforated backing and be produced for installation in a dispenser allowing passes to be removed from the roll as dispensed. Passes to be produced in rolls of 100 passes per roll. Passes are to be inspected before shipment for accuracy and each roll labeled with low to high sequential number. Upon issuance of a purchase order, vendor will submit a color chart to the Parks and Recreation Department for selection. The color choices available must be deep vibrant colors that are fade-resistant and easy to distinguish under glaring sunlight.
