Specifications include, but are not limited to: 4.1.1. One (1) tank with 825 gallon total usable capacity; 4.1.2. The tank will be split into three (3) 275 gallon compartments; 4.1.3. Aluminum interior with fiberglass exterior is the PREFERRED tank construction material; 4.1.4. One (1) O2 Manifold (2 bottle input x 3 line output) mounted on the left/drivers side; 4.1.5. Three (3) Victor O2 Flow meters (or compatible) 0.5-7 liters per minute (lpm) mounted in J-box adjacent to FRESH-FLO J-box for electrical; 4.1.6. Four (4) D-Rings or compatible rigging: One (1) in each top corner of the tank for lifting; 4.1.7. Tank outside dimensions should be no larger than 112" long x 96" wide; 4.1.8. See Exhibit I, page 39 below for drawing. 4.2. Compartment Specifications: 4.2.1. Three (3) total 12” diameter discharge outlets, one (1) outlet in each compartment (two right side, one rear discharge); 4.2.2. Each outlet will be manufactured of; 4.2.2.1. Schedule 10 aluminum; 4.2.3. And equipped with: 4.2.3.1. 12” expansion plugs; and, 4.2.3.2. Caps. (sloped as noted in Exhibit I, page 39 below) 4.2.3.3. Interior slide gate made with 3/8” rubber and fiberglass or aluminum backing. Slide gates to be operated with recessed T-handles from the top. 4.2.4. Fresh-flo model TT transport aerators; 4.2.4.1. Each aerator will be controlled by toggle switches with indicator lights on a centralized J-box located on the left/driver’s side). 4.2.5. Each- compartment will also be equipped with: 4.2.5.1. One (1) 24” Point Four Micro Bubble Diffusers (MBD); 4.2.5.2. One (1) 2” diameter (minimum) vent on top of each compartment; 4.2.5.3. One (1) 2” diameter tempering brass ball valve for each compartment, low velocity screen on the interior each located down low on the right/passenger side; attached via threaded male fitting. 4.2.5.4. One (1) recessed sight gauge per compartment manufactured of Poly tubing and fittings located on the right/passenger side; 4.2.5.5. Large top hatches with gas shock assist and locking hatches: 4.2.5.5.1. All to be opened/lifted from the passenger/right towards the left/drivers; 4.2.5.6. Interior dark blue powder coating; 4.2.5.7. Exterior standard white fiberglass or other options; 4.2.5.8. Minimum 2” sidewall and top foam insulation;
