Specifications include, but are not limited to: The consultants will serve as a City representative on construction projects assigned and will work closely with and under the direction of the Street Transportation Department designated Construction Inspection Supervisor or other project managers of the Street Transportation Department Street Maintenance Division. It is anticipated that inspection assignments may include, but are not limited to the following types of work: • Crack Seal • Scrub Seal • Slurry Seal • Micro-surfacing • Fog Seal • Pavement Mill and Overlay • ADA Curb Ramp Replacement and Other Portland Cement Concrete Repair • F.A.S.T (Fractured Aggregate Surface Treatment) • Daily interaction with the contractor(s) (may include irregular work hours) • Other scopes as assigned Street Transportation Department projects that are ongoing or scheduled for construction citywide could be assigned. Work will be performed within the public Right-of-Way. The consultant will be responsible for providing services including, but not limited to: • Perform inspections on a per project basis • Monitor and document construction progress by contractors • Inspect construction operations and materials used by contractors • Observe, record, and review performance tests • Prepare daily reports, test results, and photo records • Inspect and enforce barricade set-ups in accordance with City of Phoenix Traffic Barricade Manual • Review of punch list items • Review and coordinate to contractors “request for information” (RFI), submittals, and change orders with City’s supervisory and project manager, and provide response as needed • Work under the direction of the Street Transportation Department Inspection Supervisor • Provide other services as required to support successful completion of the work and City’s interest The consultant will provide vehicles, fuel, code books, cellular phones, and laptops/tablets for the field inspection team, and other equipment deemed necessary to complete the tasks. Cell phones and laptop/tablet must have full field connectivity. Inspections must be entered in real time during the workday. Consultant must provide technical support for their equipment.
