Specifications include, but are not limited to: Exterior, On B side, remove plastic on ground and inspect, repair and/or replace rotten or damaged wood trim or siding. Inspect wood sill and framing, report any damage requiring repair to the program. Adjust grade on the B side so the lowest wood clapboards or trim is at least 8” from the ground. If not feasible, install heavy gauge aluminum to cover the wood sill and then install wood trim at 8” above grade. Pitch grade so water runs off. Contact lead consultant, with any questions. Clapboards, all on main house, (but not on the addition), wood. A, B, D, Prepare surfaces, spot prime as needed, with oil Yard Plants area, up to 3 feet from the house. A side Add 4 inches of mulch in garden area High lead in soil levels primer and paint 1 coat of an approved encapsulant paint. All clapboard siding on the rear addition (Bath and Room 3) are neg. for LBP.. Ext. fascia trim and soffit, all, wood. Do all upper trim on complete house, include addition All side Prepare surfaces, spot prime as needed, with oil primer and paint 1 coat of an approved encapsulant paint. Do all upper trim on complete house, include addition. All window casing, 14, wood All side Prepare surfaces, spot prime as needed, with oil primer and paint 1 coat of an approved encapsulant paint. Aluminum storm windows, 14 All sides Remove all storm window units prior to preparing and paint window casing, except for Bath storm
