Specifications include, but are not limited to: 3.1 The bidder’s “Lump” sum pricing in Ebid must reflect providing the following: 3.2 Estimated Sizes 3.2.1 3.36ft High 3.2.2 15.96 Wide 3.2.3 Total SQF – 53.61ft 3.3 Estimated Resolution 3.3.1 256 Resolution High 3.3.2 1,216 Resolution Wide 3.4 Pixel Pitch Requirement 3.4.1 Pixel Pitch – 4 mm. SMD with Black substrate behind the SMD lighting diodes 3.4.2 Pure black background 3.4.3 Vendors must provide viewing angles of their product. 3.4.4 Gold bond wiring is required. 3.5 HDR is required for all boards. 3.6 Service Access 3.6.1 FRONT service access is required. Magnetic mounted Lighting unit with small safety on each lighting unit for drop protection. 3.7 Power Requirement 3.7.1 A maximum power requirement is 3.00 kw/208. 3.8 Weight Requirement 3.8.1 Weight cannot exceed 600lbs, including the frame. 3.9 Frame Requirements 3.9.1 Frames must include brackets to mount to the handrail above each vom. 3.9.2 Cabinets must have a rounded top with protection of liquid run off onto the LED Lighting elements. 3.9.3 Two (2) of the boards must have a small rail to allow for the seating section to raise in and out with forklift. The rail protects the forklift from having to get run into the board. 3.10 LED Controller 3.10.1 LED must be able to be controlled by Daktronics Show Control software/hardware. 3.11 OES Scoreboard 3.11.1 We control the score clocks using OES. New boards must be able to accommodate OES to display teams scores during games. 3.12 Fiber Requirements 3.12.1 Winning vendor is responsible for running and installing all fiber needed for each corner board. (preferred fiber transport of SM tactical and Cat6E ethernet) 3.13 Warranty Term 3.13.1 At least 2 years parts and labor required. . (With a 3% inventory of on-site part including media convertors, LED modules, controllers, and power supplies) 3.14 Service 3.14.1 24/7 at no charge technical support 3.15 An image of existing corner boards is shown in Exhibit A
