Specifications include, but are not limited to: The general requirement is for a single station, a single robot cell arc welder with a turntable for welding steel parts. The system should be designed for medium parts and high production runs. Cell assembly shall include fencing, robot riser, shipping bracket, controller base assembly, Ethernet/IP hardware, cabling, and a simple 3-button post-mounted operator station. The system should have a common robot base and controller base assembly to allow easy transportation and setup. This cell assembly is to include a 60” two-sided turntable. It is partitioned with an arc flash screen that allows concurrent loading/unloading and part processing while keeping the operator safe. The system must include a total safety environment complete with door interlocks, flash curtains, light curtains, and a Functional Safety Unit (FSU) included in the robot controller to safeguard the operator while loading and unloading parts. The system is to also include an exhaust system to remove any fumes from the welding process. The arc welder system is to be delivered to the MIB Meridian Manufacturing facility at 6603 Laurel Dr., Meridian, MS 39307.
