Specifications include, but are not limited to: Overall minimum dimensions of 24' long x 15' high x 8' wide • Units shall be equipped with the net mesh being made of heavy gauge welded wire, galvanized and vinyl coated with a 1.5" square opening. The back net shall be reinforced with 3/16" aircraft cable and connected via the cable to the frame. • Units shall allow for the option of outrigger use during times of high winds. Outriggers shall be built into the frame for stability and extend a depth of 15ft with 3 depth settings. • Units must be portable and must be able to connect via a factory installed adjustable lift adapter for any standard pay-loader bucket or a standard bulldozer blade. The unit shall be capable of being lifted from the front or rear of the unit. • Lifting hooks shall meet the following requirements. Vertical height adjustment: min 6ft-9in to a max of 12ft-2in Horizontal hook adjustment: 5 increments from 11in to 2ft-7in • Units shall be constructed with an additional ¾" thick steel plate along the front base of the unit to prevent potential damage from U shaped landfill blades. • Uprights shall be made of 4" x 2" x 1/8" rectangular steel. • Units shall be delivered covered with enamel paint. • Units shall be manufactured with a heavy litter control panel with two side wing nets, and a canopy for maximum litter containment. • Units shall be designed for 70MPH winds and be designed to continue to force litter down to the bottom of the unit. • Units must come with 5 Year Warranty.