Specifications include, but are not limited to: POWERTRAIN: Cat C3.EB diesel engine – Gross horsepower per SAE J1349 – 74.3 hp (55.4 kW) @ 2400 RPM – Electric fuel priming pump – Glow plugs starting aid – Liquid cooled, direct injection – Air cleaner, dual element, radial seal -S-O-S sampling valve, hydraulic oil -Filter, cartridge type, hydraulic -Filters, canister type, fuel -and water separator -Radiator/hydraulic oil -cooler (side-by-side) -Spring applied, hydraulically released, -parking brakes -Hydrostatic transmission -Four wheel chain drive- HYDRAULICS: ISO or H pattern controls: -Electro/hydraulic implement control -Electro/hydraulic hydrostatic – transmission control ELECTRICAL: 12-volt electrical system -80 ampere alternator -Ignition key start/stop/aux switch – Lights: --Gauge backlighting – Two rear taillights – Dome light – Backup alarm -Electrical outlet, beacon – OPERATOR ENVIRONMENT: Operator warning system indicators: Air filter restriction –Alternator output –Armrest raised / operator out of seat –Engine coolant temperature –Engine oil pressure –Glow plug activation –Hydraulic filter restriction –Hydraulic oil temperature – Park brake engages –Engine emission system – Gauges: fuel level and hour meter – Storage compartment with netting -Ergonomic contoured armrest -Adjustable joystick controls -Control interlock system, when operator -Leaves seat or armrest raised: --Hydraulic system disables –Hydrostatic transmission disables –Parking brake engages -ROPS cab, open, tilt up -Anti-theft security system w/6-button -keypad -FOPS, Level 1 – Top and rear windows -Floormat -Interior rear view mirror -USB Charging port -Horn -Hand (dial) throttle, electronic FRAMES: Lift linkage, vertical path -Chassis, one piece welded -Machine tie down points (6) -Belly pan cleanout -Support, lift arm -Rear bumper, welded OTHER STANDARD EQUIPMENT: Engine enclosure – lockable -Extended life antifreeze (-37C, 34F) -Coupler, mechanical -Hydraulic oil level sight gauge -Radiator coolant level sight gauge -Radiator expansion bottle -Cat ToughGuard TM hose – Heavy duty flat faced quick disconnects with integrated pressure release -Split D-ring to route work tool hoses -along side of left lift arm -Hydraulic demand cooling fan -Per SAE J818-2007 and EN 474-3:2006 and -ISO 14397-1:2007
