Specifications include, but are not limited to: A. Building Dimensions: Indicated on the Drawings. 1. Horizontal Dimensions: Measure to inside face of wall sheets. 2. Eave Height: Measure from top of finished floor to intersection of insides of roof and sidewall sheets. 3. Clear Height Between Finished Floor and Bottom of Roof Beams: Indicated on the Drawings. B. Primary Structural Members: 1. Primary Framing System: Framing system as specified in this specification section. 2. Frames: Welded-up plate section columns and roof beams, complete with necessary splice plates for bolted field assembly as specified in this specification section. 3. Bolts for Field Assembly of Primary Steel: High-strength bolts as indicated on erection drawings of metal building system manufacturer. 4. Beam and Post Endwall Frames: Endwall corner posts, endwall roof beams, and endwall posts as required by design criteria. 5. Exterior Columns: Welded-up "H" sections or cold-formed “C” sections. 6. Interior Columns: “H” sections or tube columns. 7. Connection of Primary Structural Members: ASTM A 325 bolts through factory-punched holes. 8. Primary Structural Members: Paint with metal building system manufacturer's standard primer with surface preparation as specified in this specification section. C. Secondary Structural Members: 1. Secondary Framing System: Framing system as specified in this specification section. 2. a. C/Z Purlins and Girts: Acrylic-coated G30 galvanized finish. b. Truss Purlins: Acrylic-coated G30 galvanized finish. D. Metal Roof System: Metal roof system as specified in this specification section. E. Metal Wall System: Metal wall system as specified in this specification section. F. Where metal panels are required to be painted, use coating system as specified in this specification section.
