Specifications include, but are not limited to: Water Tanker Flush system with Hose Reel: LIQUID TANK: Tank shall have a capacity of 1850 gallons rotationally molded polyethylene, UV protected, with (2) molded in baffles and a 16” threaded man-way with removable center for easy access to inside of tank. The tank must have a specific gravity rating of no less than 1.5, and have molded in gallon-age markers at the rear of the tank. Tanks shall be low profile elliptical shape with a domed top to provide maximum stability and area efficiency (dimensions H62” x W78” x L139”). Hot Dipped Galvanized Tank Hoops. FRAME ASSEMBLY: Full welded, Hot Dipped Galvanized heavy duty steel construction. Subframe shall be compatible with SwapLoader SL-400 Hooklift Loader and include rear ground rollers. LIQUID PUMP: The product pump shall be a 350 GPM cast-iron centrifugal pump it requires 20 GPM of oil flow with 3” Full port inlet x 2” Full port outlet ports. Pump shall have a cast-iron impeller, driven by a hydraulic gerotor motor direct coupled to the pump, 416 stainless steel shaft to with stand corrosive environment and not harm the shaft seals. Pump housing must have integral drain ports with plugs. PLUMBING AND HARDWARE: Full 3” Suction plumbing with 3” fill valve, Open loop, 2” electrically operated valves to operate 2 adjustable duck bill type flusher nozzles attached to a swing down rear spraybar for street flushing in reverse. A 1” x 100’manual rewind hose reel shall be mounted toward the rear of the subframe and include a fire hose type nozzle. Additional section shall be added in hydraulic valve to operate this unit. System will be operated by a FORCE America 5100EX control system to accept existing trucks.
