Specifications include, but are not limited to: Seismic retrofit of select Concrete Masonry Unit (CMU) walls using a fiber-reinforced polymer (FRP) system; Seismic retrofit of select CMU wall-to-2nd floor connections using an (FRP) system Seismic retrofit of select CMU wall-to-roof connections using structural steel framing and post-installed anchors. Seismic retrofit of existing equipment, furnishings, decorative features, and other tall elements susceptible to overturning during a seismic event by providing adequate restraint to the existing walls and/or floors. Seismic retrofit of mechanical and electrical elements susceptible to overturning during a seismic event by providing external restraint to the existing walls and/or floors. Seismic retrofit of four (4) wall-mounted transformers in the Apparatus Bay by providing lateral bracing. Seismic retrofit of a radiant heat system in the Apparatus Bay by providing lateral bracing. Seismic retrofit of mechanical, electrical, and plumbing equipment exceeding 75 pounds located in-line with ducts or pipes by providing independent lateral bracing. Seismic retrofit of unbraced gas pipes by providing lateral sway bracing. Replace rooftop bearing pipe supports to include pipe clamps.
