Specifications include, but are not limited to: 3 pt. Hitch Mounted Brush Chipper 540-RPM 1. GENERAL REQUIRMENTS 1. Category-2 Hitch 2. 540-RPM direct drive with shear protection 3. 10-inch diameter minimum capacity with minimum 15-inch wide slab opening 4. Dual, reversible hydraulic feed rollers (tractor supplied hydraulics, 4.4 gpm rated) 5. Intake hopper mounted safety bar 6. Shielded PTO shaft 7. 70-140 PTO rated hp compatible 8. Rotor minimum requirements, diameter 36-inch, weight 400 pounds 9. Rotor knives 4-minimum, replaceable hardened steel 10. Discharge chute rotation 275-degree minimum 11. Approximate weight 2000-pounds 2. MANUALS Three (3) manuals must be supplied. Manuals must include operators, service and repair information as well as an illustrated parts list. 3. WARRANTY Entire unit must be covered under warranty for one (1) year. Warranty must include all parts and labor to correct any material, workmanship or manufacture defects. If component manufacturer’s warranties are for a longer period, they must apply. Warranty must begin when unit is delivered to the requesting location.
