Specifications include, but are not limited to: furnishing one new, current production model 8 ½ x 16’ rear ramp door, right side door, front v-nosed enclosed storage trailer, complete and ready for use are specified below. All freight, dealer service, and other dealer charges shall be F.O.B. the Highway Garage, 230 Clover Mill Road, Mansfield, CT and shall be included as part of the bid price. Bidder shall provide all manuals for the equipment provided, in book form (printed media). Standard manufacturer’s warranty (trailer body and other equipment) must be provided and attached to this bid (consideration will be given to better warranties). Enclosed trailer – Pace model K10216SCSV-070, Haulmark TWV851GT2, Wells Cargo RF851GT2, or equal, 8.5’ x 16’ with 84” interior height. Enclosed trailer shall have a steel frame, screwless aluminum exterior skin and high performance (water impervious) plywood walls and flooring. Main frame – 2” x 6” steel tubing 16” on center with 16” on center full-height cross members, 16” on center tube sidewalls, 16” on center roof bows. V-Nose – 30” deep sloped V-Nose with 6” drop. Exterior – Screwless aluminum, 0.030”. Roof – One-piece seamless aluminum, with 1” x 1½” semi-crowned steel tubes 16” on centers. Coupler & Tongue – 12in. extended 3-pc hitch and adjustable coupler with 6in main rails; 2-5/16” A-Frame ball coupler. Stone guard & nose cap – 24” straight ATP .025 embossed stone guard & ATP nose cap. Side entry door – 36” wide, 24” from front, with flush lock and metal wire door holdback, drip rail above door and interior recessed step. Spring-assist rear ramp door – Full width (6’-8’), spring assist rear ramp door with three 8” ramp to body hinges with 1” pins, 3/4 “ water resistant plywood wearing surface, 16” ramp extension with 4” piano hinge, and 55” x 1” pivoting locking bars on each end of the trailer body to lock the ramp in its closed position with two padlocks. Drip rail above the door. Trim – 2.5” aluminum top trim; 1.5” aluminum bottom trim; large J-trim on ramp doors; matching color aluminum rear hoop; Lauan ceiling liner strip. Vents – 2 flo-thru sidewall vents. Walls and flooring – ¾“ high performance wood flooring; 3/8” high performance wood walls. Jack, chains, and rear corner supports – 2,000 lb. top-wind coupler mounted jack with sand pad; safety chains; 1-3/8” adjustable square tube rear corner supports for each corner. Wheels, tires, & fender flares – 15” silver steel wheels; ST205/75R15 “C” radial tires; smooth teardrop tandem fender flares. Hubs and axles – Tandem/Drop/electric 3500 lb. axles with superlube hubs. Lights & Electric – LED dome light with switch; bullet LED marker and clearance lights; Slimline LED tail lights with integrated backup light; 7-way electric plug; breakaway battery w/switch. Color – White License plate bracket – Molded plastic Undercoating – Main frame D Rings – 5,000 lb. bolted with steel plate, 36” on center 2- 1 ft., 2- 15 ft. from rear.
