Specifications include, but are not limited to: Exterior: 1. Demo and replace all damaged siding. All new shall match existing as close as possible. 2. Pressure wash and clean all siding and exterior surfaces. 3. Demo existing main level windows and replace with Spec Thermo-Tech vinyl single hung windows that meet egress requirements. Modify the openings for each of the 3-lite windows to be replaced with two single hung windows side by side separated by a mullion. Adjust siding to fit new windows. Install j-channel and caulk around perimeter. Color selection: white. 4. Demo all existing shutters. Replace with Mid-America standard open louver shutters. Color selection: 078 Wineberry. 5. Demo and replace front and side entry doors and frames per Spec Book. Include install of Frontline Building aluminum clad wrap per Spec Book. Provide and install new lock set. New hardware shall be satin chrome. New entry door shall be Therma-Tru steel entry door, ½ lie, collection/line: profile steel, 2 panel flush with Saratoga decorative glass. Door color selection: Cabernet; frame selection: white. 6. Supply and install Larson Evanston Multi-vent Midview storm doors on each front and side entries. Include chain kits. Color selection: white. 7. Supply and install polycarbonate egress well cover. Interior: 1. Demo and replace all smoke detectors with spec combo smoke c/o detector to meet code compliance. 2. Provide and install all new window extension jambs and trim for the windows Include spray foam during installation. Match existing finishes. 3. Flooring a. Demo living room, hallway, bathroom and rear bedroom flooring and underlayment. Grind and prep subfloor as needed for a neat even finished appearance, including floor leveler, if needed. Supply and install Shaw Mineral Core Cattitude flooring. Install per manufacturer’s specifications. Color selection: Ethereal 01069. Include supply and install all new spec underlayment. b. Provide and install transition strips at bedrooms and dining area abutments. 4. Demo and replace 4 door slabs: 3 bedrooms and basement stairway entry. Match existing finish. New doors maybe flush hollow core, same as existing. Supply and install all new satin chrome finish hardware. 5. Provide and install all new satin chrome finish door hardware throughout the home. 6. Adjust all doors. 7. Upper Bathroom a. Demo and replace tub/shower. If not Warm Rain remodeler unit, provide manufacturer for review. b. Provide materials and labor to complete any necessary carpentry or sheetrock adjustments. As well as any subsequent finish work such as priming and painting to match existing. c. Demo and replace shower trim kit per Spec Book. d. Demo and replace toilet stool per Spec Book. e. Demo existing baseboards and replace with new white pvc boards to match style of existing baseboards throughout the home. f. Demo and replace bath fan with Panasonic FV-05-11VKSL2 model, vented to the exterior. Include Condensation Module FV-CSVK1. g. Demo existing bath vanity and top. Supply and install Wyndham Collection Daria 30”x22” dark gray vanity with white cultured marble top and rectangular undermount bowl with chrome finish hardware; or similar vanity model. h. Demo and replace bath faucet per Spec Book. i. Provide materials and labor for any necessary plumbing adjustments throughout room. j. Demo existing mirror/ medicine cabinet. Supply and install Zenna Home 24”x26” white framed tri-view medicine cabinet; or similar unit. k. Demo existing wall cabinet above toilet. Supply and install Wyndham Collection Daria 25”x9”x30” dark gray wall cabinet with chrome finish hardware; or similar cabinet.
