Specifications include, but are not limited to: 1. Contractor shall remove all shingles, nails and underlayment on all seven (7) cabins. 2. Contractor shall remove and replace damaged decking with new materials to match existing. 3. Contractor shall install new ice and water shield underlayment to roof area according to manufacturer’s recommendations. 4. Contractor shall install new architectural style shingles according to manufacturer’s recommendations with drip edge on all seven (7) cabins color shall be selected by park management and approved by this agency. (Contractor shall be responsible for nails penetrations into interior of building). 5. Contractor shall install new flashing has needed to provide weathertight seal around vents and roof penetrations. 6. Contractor shall provide and install metal ridge cap to prevent leaks. 7. Contractor shall replace all damaged and decayed fascia with new material to match existing prime and paint before wrapping all fascia with 19 gauge metal fascia metal. 8. Contractor shall sand, scrape and pressure wash exterior of cabins, replace any damaged and decayed siding and trim with new material to match existing and paint exterior of all seven cabins. 9. Contractor shall caulk all areas has needed before applying one coat of primer and two coats of exterior latex paint to all cabins color shall be selected by park management and approved by this agency. 10. Contractor shall paint all the window trim on all seven cabins and stain all doors. 11. Contractor shall clean and pressure all decks replace all damaged and decayed decking and rails has needed with new material to match existing. Replace all decayed and damaged rails and seal rails. Color of sealing will shall be selected by park management and approved by this agency. 12. Contractor shall install new 5-inch k style gutters with screens and down spouts to all seven cabins, color of gutters and down spouts shall be selected by park management.
