Specifications include, but are not limited to: 1.0 Standard Equipment: Base Price includes below listed Specification / Standard Equipment / Configuration: (Yes or No) 1.1 Turbine Single Engine with min 700 hp 1.1.1 Flight hours <50 hours 1.1.2 Engine TBO (time before overhaul) > 4,000 hours 1.20 Avionics (Includes Garmin G1000 NXi avionics suite fully integrated) No Entry Required 1.2.1 GIFD 1.2.2 Flight crew radio communications 1.2.3 Navigation receivers 1.2.4 Engine indicating system 1.2.5 Crew Alerting System 1.2.6 Flight Guidance System 1.2.7 Flight Instruments 1.2.8 Altitude/Heading Reference System 1.2.9 Transponder with ADS-B In/Out Capability 1.2.10 Emergency Locator Transmitter with remote switch located on the instrument panel 1.2.11 Dual: GPS, AHRS, ADC 1.2.12 Dual Garmin GMA 1360 audio panels 1.2.13 GTX 345R Mode-S transponder with ADS-B in/out 1.2.14 Class-B terrain awareness system 1.2.15 Pilots Operating Handbook, Manuals, Aircraft Maintenance Records Logbooks, G1000 SD Card, Unlock Cards (TAWS, Autopilot, SVS) 1.2.16 Autopilot - Garmin GFC-700 with electronic stability protection, level mode, coupled to F/D, yaw damp 1.2.17 406 MHz ELT w/ remote switch and GPS enabled 1.3 Standby Instrumentation 4-in-1 Electronic No Entry Required 1.3.1 Attitude indicator 1.3.2 Airspeed indicator 1.3.3 Altimeter 1.4 Environmental No Entry Required 1.4.1 Heat 1.4.2 Air Conditioning (List here if OEM standard) 1.4.3 Ten (10)-place Oxygen system with large bottle (List here if OEM Standard) 1.5 Lighting No Entry Required 1.5.1 LED Exterior Navigational Lighting and LED landing and taxi lighting with pulse on wing 1.5.2 Exterior wingtip strobe lights 1.5.3 Interior courtesy loading lights 1.5.4 One overhead LED map light, passenger overhead lighting 1.6 Interior No Entry Required 1.6.1 Summit-Cool Blue Interior with passenger capacity of 8, (Pilot, Copilot, plus 6 people) 1.7 Exterior No Entry Required 1.7.1 High wing configuration with discontinuous leading-edge wing 1.8 Loose Equipment Exterior No Entry Required 1.8.1 Pitot tube covers, Exhaust/Propeller cuffs, Three (3) Engine Inlet plugs, Two (2) Lower Cowl Plugs, Horizontal Stabilizer Hole Plugs 1.8.2 Tail Stand, Axle Jack point, Jack Pads
