Specifications include, but are not limited to: 1. Engineering and Design: The Audiovisual Systems Integrator shall provide all system engineering and design necessary to develop the complete systems described herein. Engineering and Design shall include preparation of all necessary electronic schematics, hardware drawings, systems diagrams, schedules, and lists. 2. Procurement and Assembly: The Audiovisual Systems Integrator shall procure and assemble all hardware and equipment and any additional materials as required to deliver completely functioning Audiovisual Systems, unless otherwise noted. 3. Software Programming: The Audiovisual Systems Integrator shall perform all required software setup, configuration, and programming required to develop a complete operating system in accordance with this Specification, including all control logic and push-button component faceplate or interface programming. 4. Installation: The Audiovisual Systems Integrator shall install all equipment, cable, wiring, connectors, plates, and other material at the Project site per the Audiovisual Systems Integrator’s approved designs. The Audiovisual Systems Integrator shall install any Owner Furnished Equipment identified in this document and calibrate it to work with the integrated systems. 5. Testing and Adjustment: The Audiovisual Systems Integrator shall perform all tests and adjustments, furnish all test equipment necessary and perform all work required to properly configure the systems and to verify their performance in accordance with the information in this Specification and the Audiovisual Systems Integrator’s approved engineered designs. 6. Acceptance Testing: Prior to Owner acceptance and hand-over of the completed Audiovisual Systems, the Audiovisual Systems Integrator shall demonstrate the operation of the complete systems, including all individual devices and specified control functions. Both subjective and objective tests may be required by the Owner to determine compliance with the information in this Specification and the Audiovisual Systems Integrator’s approved designs. 7. Training: The Audiovisual Systems Integrator shall provide technical training of the Owner's staff, instructing them on Audiovisual Systems operation, maintenance, and troubleshooting. 8. Warranty: The Audiovisual Systems Integrator shall warranty the Audiovisual Systems in accordance with the terms of this Specification. 9. Specific Responsibilities: a. Supply and install miscellaneous material, as necessary, to mount the audiovisual system equipment.
