Specifications include, but are not limited to: 2024 SW TRUCK, CAB & CHASSIS –60,000 #, GROSS VEHICLE WEIGHT RATING MINIMUM 60,000 POUNDS; CAB - CONVENTIONAL 3-POINT ACCESS CAB, ADDITIONAL GRAB HANDLE TO BE MOUNTED ON THE EXTERIOR OF DRIVER AND PASSENGER SIDE CAB CORNER, BUTTERFLY HOOD OR HATCHES TO ALL SERVICE POINTS, STATIONARY GRILLE, DUAL FACTORY INSTALLED 7.5" FENDER MOUNTED HEATED CONVEX MIRRORS, ONE PIECE WINDSHIELD, DRIVER AND PASSENGER DOOR OPERATING VENT WINDOWS OR FACTORY INSTALLED VENT SHADES, CAB NOISE SUPPRESSION ON INSIDE OF FIREWALL AND ENGINE COMPARTMENT, ADDITIONAL FRONT DIRECTIONAL TURN SIGNAL LIGHTS TO BE MOUNTED ON TOP OF OR IN FENDERS, INNER FENDER SPLASH GUARDS, CAB SUSPENSION TO BE AIR BAG TYPE. AUX. HEADLIGHT HARNESS TO BE LOCATED IN THE FRONT OF THE HOOD AT THE LEFT SIDE OF THE FRAME AND EASIBLE ACCESSABLE BY THE TECHNICIAN FOR LED PLOW LIGHTS & TURN SIGNALS. AN INDEPENDENT SWITCH INSIDE THE CAB SHALL BE PROVIDED FOR OPERATION OF THE PLOW LIGHTS; RUBBER FENDER EXTENSIONS, OUTSIDE AIR / TEMPERATURE MONITOR, WIPER FORCED TO INTERMITTENT WHEN SERVICE BRAKE IS APPLIED, IGNITION KEY SHALL BE UNIQUE AND NOT KEYED ALIKE FROM THE FACTORY, CAB HEIGHT MINIMUM 59-1/2” (EXTERIOR FRAME TO TOP OF CAB), CAB – TRUNION DIMENSION MIN 120” TO MAX 126”, BBC DIMENSIONS MIN 105” TO MAX 117”; TRANSMISSION - ALLISON AUTOMATIC – 4500 RDS, SIX SPEED, PRE-SELECT FOR SELECT ONE (1) GEAR DOWN VARIABLE COMPRESSION ENGINE BRAKE 3RD GEAR HOLD DYNAMIC SHIFT SCHEDULE, RIGHT SIDE DASH MOUNTED TOUCH PAD CONTROL OR STEERING WHEEL PADDLE SHIFTER, AUTO NEUTRAL WHEN PARKING BRAKE IS APPLIED, INTEGRAL OIL LEVEL SENSOR, TES 295 APPROVED SYNTHETIC FLUID OR TES668, EXTENDED TRANSMISSION WARRANTY COVERAGE- PARTS, LABOR AND TOWING FOR SEVEN (7) YEARS, UNLIMITED MILEAGE FROM IN-SERVICE DATE (DETERMINED BY STATE), AUXILIARY COOLING
