Specifications include, but are not limited to: BASIC SPEFICATIONS 1. Backhoe shall have a minimum digging depth of 14’ (4278 mm) with standard stick and 17’7” (5372mm) with extendible stick. 2. Engine net peak power @ 1800 rpm shall be at least 105 HP (78kW) according to SAE J1349. 3. Unit shall have a maximum overall transport height of 12 ft (3665 mm) with standard tires. 4. Unit shall have a maximum height to the top of the canopy of 9 ft 3 in (2815 mm) with standard tires. 5. Maximum overall transport length shall be 23’6” (7163 mm) with standard tires and standard stick. 6. Maximum overall transport length shall be 23”7” with standard tires and extendible stick. 7. Unit shall have a maximum width of 7’5” (224 mm) with a general purpose bucket. 8. Unit shall have a minimum wheelbase of 7’3” (2200 mm) ENGINE 1. Engine must comply with U.S. EPA Tier 4 Final / EU Stage IV off road emission requirements. 2. Machine shall utilize Selective Catalytic Reduction (SCR), diesel oxidation catalyst (DOC), and diesel particulate filter (DPF) that are designed not to require service for the life of the machine. 3. Turbocharged engine net flywheel horsepower shall be at least 91 HP (68 kW) @ 2200 RPM according to SAE J1349. 4. Turbocharged engine net flywheel horsepower shall be at least 91 HP (67.7 kW) @ 2200 RPM according to ISO9249. 5. Turbocharged engine net peak flywheel horsepower shall be at least 105 HP (78.3 kW) @ 1800 RPM according to SAE J1349. 6. Turbocharged engine net peak flywheel horsepower shall be at least 105 HP (78.1 kW) @ 1800 RPM according to ISO 9249. 7. Net peak torque at 1500 RPM shall be not less than 321 ft-lb (435 N-m) with 48% torque rise. 8. Unit shall be equipped with a turbocharged, four cylinder, direct injection diesel engine with high strength, cast iron alloy single block design for high strength and long life.
