Specifications include, but are not limited to: FILM INSTALLATION A.Install in accordance with manufacturer's instructions. Installation must be accomplished by arecognized professional installer of film for solar control or safety and security purposes. Completedwork must meet IWFA visual acceptance standard.B.Install without bubbles, ripples, drips, dirt, cuts, tears or gaps between film and frame. C.Clean newly installed film and window frames after installation. D.Clean up cleaning solutions, run-off cleaning water and adhesive mounting solution.1.14WET GLAZE INSTALLATION A.The wet glaze attachment system shall be applied according to the guidelines of the Manufacturer by an Authorized Dealer/Applicator. For guidance on the installation of wet glaze attachments, please review Solar Gard tech bulletin document PDF0258.B.For blast mitigation purposes, a minimum 1/2-inch overlap on film and frame (excluding glazingstops) or 3/8-inch depth at bead center
