Specifications include, but are not limited to: 2. APPLICATION 2.1 These service bodies will be mounted on the following vehicles: 2.1.1 2023 Ford F350 regular cab 4x4, 8’ box, 10,900 GVWR, 7.3L gasoline V8, Oxford white 2.1.1.1 Cab to axle length 56” 2.1.1.2 Single rear wheel 2.2 Factory pick up boxes will need to be removed. 2.3 Factory OEM rearview camera to be remounted on new service body. 2.4 Quantity of two (2) service bodies needed. 3. MODEL 3.1 The equipment furnished under these specifications shall be new of the latest improved model in current production as offered to commercial trade. 3.2 Example Body: 3.2.1 Warner Select Pro. 3.2.2 Knapheide 696. 3.2.3 Stahl Challenger ST 3.3 Advertised standard equipment of example bodies meets the general requirements for dimensions, design and construction. 3.4 All advertised standard equipment shall be provided whether or not specifically addressed. 3.5 All required non-standard items will be addressed in the technical specifications. 3.6 Bids shall include all costs associated with removing factory pickup bed, installation of service and transferring factory OEM rearview camera to new service body. 4. APPROXIMATE BODY DIMENSIONS 4.1 96" length 4.2 78" width 4.3 40" height 4.4 49" floor width 4.5 14.5" compartment depth 5. OPTIONS 5.1 Workbench style rear bumper approximately 20” deep 5.2 Rear bump steps (cable or belt style) 5.3 Receiver hitch to meet the required tow capacity of the unit (18,400 lbs. capacity) 6. MOUNTING 6.1 Required provisions will be made to the truck cab and chassis before the body is mounted, to fully support the body mounting frame. 6.2 The method used must not jeopardize the truck warranty. 6.3 All welding and construction techniques shall reflect professional workmanship. 6.4 Body will have provision for fuel filler outside of any enclosure or compartment. 6.5 Factory vehicle receiver hitch, reverse camera and trailer connector to remain.
