Specifications include, but are not limited to: The Hot Mix Asphalt (HMA) supplier shall provide to San Juan County (the County) approximately 10,000 tons of ¾” and/or 10,000 tons of ½” HMA on an as needed basis. The HMA shall be in accordance with Section 423 of the New Mexico Department of Transportation Standard Specifications for Highway and Bridge Construction, 2019 Edition except as noted below. - All references in the specifications to “The Department” shall be understood as to be referring to the County. - The County will specify either an SP-III (3/4” mix) or SP-IV (1/2” mix) from Table 423.2.2.1:1 - The Design Traffic on Table 423.2.2.1.2:1 shall be <3.0. - The asphalt binder shall be PG 64-22 - The HMA supplier shall provide to the County mix designs in accordance with section 423.2.8. The mix design shall be updated annually or anytime a change in materials occurs. The mix designs shall include aggregate properties. - The HMA is to be provided F.O.B. at a commercial hot mix plant located within a twenty-mile radius of Aztec, New Mexico. The County will transport and place the HMA. - Payment will be made based on the number of tons loaded as measured by the supplier’s certified scales.
