Specifications include, but are not limited to: SPECIFICATIONS FOR LIQUID MAGNESIUM CHLORIDE SOLUTION: • Product shall be listed on the Clear Roads Qualified Products List (QPL) Category 1 - Corrosion Inhibited Liquid Magnesium Chloride (https://clearroads.org/qualified-product-list/). • A table showing Freezing Point-Specific Gravity for various percentage dilutions of product in water shall be provided. Table shall include data starting from at least 5% product in water and continue to include the percentage product in water to produce the eutectic (lowest freezing point) composition. • Bids must be accompanied with the most recent detailed product specification sheet and Material Safety Data Sheet (MSDS). All documents must be clearly legible. NH DOT reserves the right to request up to two (2) gallons of product, at no additional cost, for verification testing. SPECIFICATION – DELIVERY: • Deliveries shall be made to any of the listed NH DOT locations identified in the DOT delivery locations stated with 1. Vendor will be responsible for all necessary equipment to transfer liquid chemical products to NH DOT storage tanks. 2. NH DOT’s storage tanks will be fitted with a two-inch female stainless steel quick disconnect fitting to allow for unloading of product. SPECIFICATION – BILL OF LADING REQUIREMENTS: •The bill of lading and invoice for each shipment must contain the following information: •Name of product •Supplier and manufacturer of product •Destination of delivery •Total number of units being delivered •Total volume of delivery (in gallons) •Lot number of product being delivered. The lot number must enable purchaser to track a delivered product back to its manufacture point, date of manufacture and specific batch. MINIMUM ORDERS: Minimum loads shall be 500 Gallons. All loads shall be within legal load limitations. SPECIFICATIONS FOR LIQUID MAGNESIUM CHLORIDE SOLUTION (BRINE ENHANCER): • Product shall be listed on the Clear Roads Qualified Products List (QPL) Category 4a - Corrosion Inhibited Liquid Magnesium Chloride (Brine Enhancer) (https://clearroads.org/qualified-product-list/). • A table showing Freezing Point-Specific Gravity for various percentage dilutions of product in water shall be provided. Table shall include data starting from at least 5% product in water and continue to include the percentage product in water to produce the eutectic (lowest freezing point) composition. • Bids must be accompanied with the most recent detailed product specification sheet and Material Safety Data Sheet (MSDS). All documents must be clearly legible. NH DOT reserves the right to request up to two (2) gallons of product, at no additional cost, for verification testing. SPECIFICATION – DELIVERY: • Deliveries shall be made to any of the listed NH DOT locations identified in the DOT delivery locations stated with 3. Vendor will be responsible for all necessary equipment to transfer liquid chemical products to NH DOT storage tanks. 4. NH DOT’s storage tanks will be fitted with a two-inch female stainless steel quick disconnect fitting to allow for unloading of product. SPECIFICATION – BILL OF LADING REQUIREMENTS: •The bill of lading and invoice for each shipment must contain the following information: •Name of product •Supplier and manufacturer of product •Destination of delivery •Total number of units being delivered •Total volume of delivery (in gallons) •Lot number of product being delivered. The lot number must enable purchaser to track a delivered product back to its manufacture point, date of manufacture and specific batch.
