Specifications include, but are not limited to: PERFORMING SERVICES: The purpose of this contract is to paint 4/6 cubic yard and/or 10/12 cubic yard dump bodies, sub-frames, ladders, and wheel chock holder units. These components are mounted on 36,000-pound or 55,000-pound 2022 International chassis. TRUCK BODY SPECIFICS 1. 36,000-pound chassis –2023 International HV507 – 4x2 to include 4/6 cubic yard Everest body per specifications 2. 55,000-pound chassis –2023 International HV513 – 4x2 to include 10/12 cubic yard Everest body per specifications REQUIREMENTS • The Bureau of Mechanical Services personnel will be responsible for transportation of trucks to and from the Contractor’s location. • All work shall be performed at the Contractor's location. • The Contractor will remove the ladder and mud flaps. o The Contractor shall prime and paint these components black and reinstall up on completion of the painting of the dump body. • The Contractor will be responsible, by industry standards, to paint the dump body and wheel chock holders orange and paint the underbody, sub-frame black. o This shall include but not be limited to sanding the dump body, washing the truck, taping off vehicle to prevent over-spray and touching up any unprotected part of the frame with black. • Each truck will be completed in eight (8) working days or less (Monday – Friday, excluding observed holidays). • The Bureau of Mechanical Services personnel will inspect, approve, and accept the Contractor’s work, prior to making payment. • The Contractor’s location must be within a 25-mile radius of the Bureau of Mechanical Services, 33 Smokey Bear Blvd, Concord, NH. • All interested Contractors are encouraged to contact NH DOT – Bureau of Mechanical Services to view indicative truck/body combinations prior to submitting an offer. Please contact the Bureau at 603-271-3721 and ask for Tara Merrifield. PAINT PRODUCTS UTILIZED NOTE: the NHDOT Bureau of Mechanical Services will supply the paint, primer, activator, and reducer for the painting of the contracted vehicles. Paint products provided as requested by awarded Contractor. Contractor shall maintain enough paint product in inventory to paint contracted trucks without product availability delay. Paint products left over after the completion of the contract painting shall be returned to NHDOT Bureau of Mechanical Services. All other preparation and painting materials and equipment (i.e., tarps, covers, masking materials, sandpaper, etc.) shall be the Contractor's responsibility and cost. PAINT PRODUCTS TO BE PROVIDED Primer: • PPG Commercial Performance Coatings – CRE211 Primer Activator • PPG Commercial Performance Coatings – CRE321 Gray Epoxy Primer Paint – Orange • PPG Commercial Performance Coatings – AUE300 Orange Single Stage Topcoat (Signal Orange) • PPG Commercial Performance Coatings – GXH1086 Orange Urethane Hardener Paint – Black • PPG Delfleet Essential – ESH200 Single Stage Hardener • PPG Delfleet Essential – ESM125 Opal Black • PPG Delfleet Essential – ESX20 – Black Activator
