Specifications include, but are not limited to: 4-Part Snap-Out Sets Bound in Booklets GENERAL: There is a general version and a Native American version. There is a slight variation of copy for the Native American version if requested. Agency Name, Agency Codes, County Codes and “Local Penalty Assessment Address” (back of ply 3) will be different with each agency order. SIZE: Part 1: 8 ½” wide x 11 ½” tall Part 2: 8 ½” wide x 11 ½” tall Part 3: 8 ½” wide x 11-5/8” tall Part 4: 8 ½” wide x 11 ½” tall PAPER: Carbonless, chemical transfer, black image, mill brand bond paper (odorless & non-allergenic preferred), fine grain, non-gloss. 3M, Boise Cascade, Mead, Nashua, NCR or equivalent. Vendor's best quality required. Readability and microfilm ability are of paramount importance. CAUTION: Proper roller pressure and heat dissipation must be maintained during printing to eliminate premature activation of chemicals. Part 1: 16 lb. white, CB Part 2: 22 lb. white, CFB IMPORTANT: Paper weight for Parts 2 & 3 must Part 3: 22 lb. white, CFB be at least 22 lb. or slightly more. Part 4: 15 lb. white, CF COMPOSITIONS: Five (5)different compositions(excludingcoloredstrips andmarginalwording). Face:All parts same composition (see Attachment 1 for a Sample Image of the form face). Back: All parts different compositions. INK: Parts 1 - 4 Face: "Drop-Out Blue" (PMS 5285) and red (also see Marginal Wording and Set Numbering). Density of ink will vary from part to part. That is, Part one must be visually readable by a lawenforcement officer at night while Parts 2&3must be scannable by a Kodak or IBML Scanner or equivalent technology. Parts 1 - 4 Back: Black only. Parts 2 - 4 Face: Additional "non-bleed" colored strips at bottommargin of Parts 2 - 4 approximately 3/16" tall, short of left edge of form and extending to the right only as far as the vertical Secondary Citation Number space. Color Sequence: Part 1: None, Part 2: Yellow, Part 3: Blue, Part 4: Pink. Ply Sequence: Ply 1: 3/1 Black, Non-Scan Blue 5285S, PMS 185/ Black Backer Ply 2: 4/1 Black, Non-Scan Blue 5285, PMS 185, Process Yellow / Black Backer Ply 3: 4/1 Black, Non-Scan Blue 5285, PMS 185, Process Blue / Black Backer Ply 4: 3/1 Black, Non-Scan Blue 5285, PMS 185 / Black Backer MARGINAL WORDING: A) Each ordering agency may elect to "personalize" parts of the citations at the upper left corner with their agency name (in the same dropout blue ink as the body of the form), subject to space limitations. In addition, the citations may be further personalized with the address of the applicable court near the bottom of the form and the court address on back of Defendant's copy. B) Bottom center face each part in red ink (reverse print on colored strips Parts 2 - 4) to read: Part 1: COURT COPY Part 2: ABSTRACT COPY Part 3: DEFENDANT'S COPY Part 4: ISSUING AGENCY COPY
