Specifications include, but are not limited to: Med-Mizer Allcare AC-N, or equal, Long Term Care Beds - 3.1.1 LTC Beds must be manufactured in the USA. 3.1.2 LTC Beds must be adjustable to no more than 3.7” off the floor at their lowest setting, not including mattress height. 3.1.3 LTC Beds must be adjustable to no higher than 25” off the floor at their highest setting, not including mattress height. 3.1.4 Sleep surface width of the LTC beds must be expandable and retractable from 35”, 39”, and 42”. 3.1.5 LTC Beds must have extra positioning to narrow the bed down to a maximum of 32” wide with the sidebars attached to allow passage through doorways less than 36” wide. 3.1.6 LTC Beds must be 80” in length, expandable to 84” with a 4” extender. 3.1.7 LTC Beds must be transformable into an upright Cardiac Chair-type position with the head raised and the legs lowered operational electronically by no more than two (2) push buttons and not require any tools. 3.1.8 LTC Beds must have Trendelenburg (legs above head), and ReverseTrendelenburg (head above legs) position capability, operational electronically by no more than two (2) push buttons and not require any tools. 3.1.9 LTC Beds must have a maximum back angle of 64 degrees in the raised position and maximum knee adjustment angle of 37 degrees. 3.1.10 LTC Beds must have functionality of simultaneous up and down positioning to reduce shearing, friction, and patient migration/slippage, operational electronically by no more than two (2) push buttons and not require any tools. 3.1.11 The bed control box, aka motor, aka actuators, aka drive system, aka electronic package must have at least a five (5) year warranty. 3.1.12 LTC Beds must include and be operational electronically by a caregiver’s Control Panel, which must have the following: 3.1.12.1 Must have a digital touch screen 3.1.12.2 Must include digital scale readings 3.1.12.3 Must have the ability to lock out individual functions of the handset 3.1.12.4 Must be lockable 3.1.12.5 Must be located on the footboard of the bed 3.1.12.6 Must sit no further than 2” off the footboard to help prevent residents using wheelchairs or walkers from running into it 3.1.12.7 Must be no bigger than 11” wide x 7” tall and no smaller than 10” wide x 5.5” tall 3.1.12.8 Must have a swivel feature
