Specifications include, but are not limited to: 1 Each – Hobart CL44en-BAS Dish Machine or equal • Machine direction: left to right. • Electrical voltage: 480/60/3ph. • Electric Tank Heat: Machine to include 15 kW electric immersion heater controlled by solid-state thermostat with positive low water protection. • Internal Booster: Machine to be provided with internal, atmospheric stainless steel, pre-wired and pre-plumbed 30kW booster heater for 110-degree incoming water. • Must be Energy Star Rated (electric tank heat only). • Machine to have a minimum capacity of 202 racks per hour with 5.6 feet per minute conveyor speed. • Machine to include Opti-Rinse system using no more than .62 gallons per rack at 20 psi. • Machine to include final rinse rate to be 2.1 GPM or 126 GPH. • Machine to be provided with Configurable NSF Pot & Pan mode • Machine to be provided with standard chamber opening dimension of 22” x 19 11/16” to accommodate up to six 18”x 26” sheet pans at one time. • Machine to be provided with water hardness input & delime notification • Machine to be provided with standard features which include a dirty water indicator with an optional shut down mode, energy saver mode, low temperature alerts for all zones & service diagnostics. • Machine to be equipped with anti-jam protection that includes an electronic sensor to monitor the conveyor drive output RPM and electrically shut the unit off in the event of a change in RPM. • Machine to have a dual side pawl conveyor driven by 1/6 HP motor providing a simultaneous even push through of the racks. • Machine to have double wall insulated hinged doors. • Machine to include soil management system to have a single SST slanted screen, and a deep collection basket. • Machine to include tank and chamber to be constructed of #16-gauge stainless steel. • Machine to include 2 HP wash pump motor with inherent overload protection and manual reset located on the motor.
