Specifications include, but are not limited to: Equipment Summary: Washer/Extractor 1. Must meet or exceed NFPA 1851 Standard 2. Commercial washer extractor; minimum 60 lbs. capacity and or three complete sets of structural turnout gear. 3. 60 lb. Load Capacity, Rigid Mount Washer/Extractor. 4. Must be capable of meeting NFPA 1851 standards. 5. Stainless Steel Panels 6. 208 V/ Single Phase/ 60 Hz/ 20 Amp 7. Heavy Duty enclosed 2.2 KW Drive Motor 8. 100G Cylinder G-Force Operation 9. Hinged Control Panel 10. 4.3” Touchscreen Control 11. Flexible water level setting 12. 3” Drain 13. 5 Compartment Supply Dispenser 14. 8 External Liquid Supply Dispenser 15. 14-5/8” Diameter Door Opening 16. Data Storage/ USB Drive capable 17. 1 Year / 100% Labor Warranty 18. 1 Year Preventative Maintenance (1 service per year Gear Drying Cabinet 1. Must meet or exceed NFPA 1851 Standard 2. Capable of drying 6 complete sets of turnout gear 3. Constructed of heavy duty, cold rolled steel with reinforced base, sides and door panels 4. Powder coated with a baked-on finish 5. 208 V / Single Phase / 60 Hz / 60A 6. Glove Dryer Rack / (1) Boot Dryer Rack / (2) Shelves included 7. 6 Removable Coat and Pants Hangers 8. Diamond Plate Floor 9. Drainage Basin 10. Self-Diagnostic Microprocessor Control 12. Directed Airflow 13. 1 Year / 100% Labor Warranty 14. 1 Year Preventative Maintenance (1 service per year)
