Child Nutrition Services

Specifications include, but are not limited to: Clay County Board of Education, Child Nutrition Services is accepting proposals for dish room equipment to be installed at Clay County High School. Dishwasher: High Temperature Rack Conveyor Dishwasher to replace the current Hobart Model CRS66A. Equivalent to Hobart quality or better. Features equivalent to or greater than the following:  ≥ 202 racks per hour  22” power scrapper  Opti-Rinse system or equivalent  Automatic fill  Rinse agent dispenser injector  Rapid return conveyor drive mechanism  Large double door opening for ease of cleaning  Insulated and hinged cabinet style doors with safety interlock switches  ≥ 19.5” chamber height opening  Energy saver mode  Dirty water indicator  Low water indicator  De-lime notification  Service diagnostics  Self-aligning wash manifolds  Stainless steel body panels  Stainless steel all welded frame  Stainless steel legs with adjustable height feet  Stainless steel anti-clogging wash arms  Stainless steel self-draining pump and impeller  Overload protection with manual resets for motors  Door actuated drain closure  Vent fan control (ventilation start up when machine is powered on)  16-gauge stainless steel, electric heated tank with 15Kw electric immersion heaters, inter-wired at factory  23 gallon wash tank  Digital display (modes, temperature, alert codes, etc.)  Power scrapper vent cowl curtain kit  480/60/3 Single point electrical connection  Energy Star Certified  Install table limit switch at rolled edge on end of clean dish table and wire to control box  Provide copper drain piping from drain connection on dishwasher to floor sink or open waste water receptacle Food Waste Disposer – Equivalent to Master Disposers quality or better. Features equivalent to or greater than the following:  Provide 2 hp offset disposer unit with 8” rotor/turntable  3 adjustable legs  8-1/4” stainless steel sink adaptor to be welded into bottom of pre-rinse sink  1 swirl nozzle and solenoid  Control panel to be provided with automatic reversing magnetic contactors, overload protection, alternator, automatic delay timer for motor and water run time, low voltage protection, emergency disconnect switch, and push button operation  Install swirl nozzles in sink walls  Corrosion resistant  Antiplug relay to prevent motor reversing while running or coasting  Install disposer to adaptor and lag to floor with stainless steel bolts, control panel on mounting bracket provided under landing area and wire to solenoid and disposer.